Thursday, February 18, 2021

5 Tips to Help Your Dishwasher Run Better


It happens to everyone eventually. You rinse the dishes and load the dishwasher. When the dishwashing cycle ends, you find that your dishwasher has a standing water mess in the bottom. With all the food scraps that end up in there, it’s really not all that surprising that your dishwasher gets backed up from time to time. It is a huge pain though, for something that is supposed to make cleaning up after meals easier and more convenient. If it happens often, you shouldn’t ignore the problem because it won’t go away on its own.

We’ve listed below 5 things you can try before calling in a professional plumber.

1. Clear your garbage disposal. 

If you have an in-sink garbage disposal installed in your kitchen, chances are that your dishwasher is draining through your garbage disposal. You need to ensure that your disposal is kept as clear as possible. If there is food or waste in there, it can cause the water from your dishwasher to back up and leave the water standing in the bottom. Run your disposal completely every time you put something in it to wash away any debris and prevent clogs.

It’s a good idea to also always run the water for 15 seconds after running the disposal to ensure all the debris is washed away.

2. Clean the sink’s air gap.

If you do not have a garbage disposal installed, most dishwashers connected to the kitchen sink will have an air gap. This is a small slotted cylinder installed on top of the sink right beside the faucet. These are most often made of stainless steel. A small hose from the air gap is connected to the drain hose in the dishwasher. This works as a vent to prevent an air lock from forming inside of the drain hose, but it can occasionally become clogged by debris. If this air gap does become clogged it will prevent your dishwasher from draining properly. If this happens, water can also flood onto your counter. To clean it, twist the air gap counterclockwise to remove it, and use a stiff brush and water to remove any built up gunk.

3. Clean or change the filter.

A lot of homeowners don’t realize that their dishwasher has a filter. Most are typically located inside the machine towards the back. You can check your owner’s manual to find its exact location. These filters catch the extra food particles as water drains out of the dishwasher. You should have one small mesh filter, and a larger basket one. You should make a habit of regularly removing these filters to clean them in order to allow water to drain out without obstruction. If you find that your filters need to be removed and cleaned constantly, it’s probably a good idea to make sure that you rinse your dishes properly before putting them in the dishwasher.

4. Check the drain hose for clogs.

Before you begin this next step, it’s a good idea to use a drain build-up remover to remove any debris buildup that may be in the dishwasher.

Next, inspect your hose line to ensure that there are no kinks in the line. If there are none, your drain hose may be clogged with sludge or food debris. In order to check the hose for a clog, you’ll need to remove the lower front panel to find where the ribbed drain hose attaches to the drain pump.

Before going any further, you must unplug the dishwasher. You should not come in contact with any of the machine’s wiring, but it’s always important to put safety first when working on any electrical appliance. Place old towels under the dishwasher and remove the panel. Depending on the model, it may simply snap off. Check your owner’s manual to be sure. Now disconnect the hose from the drain pump.

Once the hose is removed, you can check for clogs by blowing into the hose. If air doesn’t pass through, you have a clogged hose. If this clog is located near the end of the hose, you can try to remove it with a thin instrument, like a straightened out clothes hanger. If no clog is seen on the drain end, you can check the end connected to the air gap or garbage disposal. If the clog is deeper, you may have to just replace the hose.

5. Clogs in other pipes

If after following the steps above your dishwasher still isn’t draining, you may have a clog issue somewhere else in your plumbing system. Pay close attention in other areas of your home. If toilets, sinks, or tub and shower drains are draining slowly or not at all, it’s best to go ahead and address those issues before they become serious and costly problems.

Dishwasher and garbage disposal care should be part of your monthly home maintenance plan, and keeping a good garbage disposal cleaner and deodorizer on hand is always a good idea.

The TruFusion™ WASHOUT™ Build-Up Remover eats away hair, grease, paper, organic matter, food and soap scum that build up in your drain lines with specially formulated dual-action biologicals and enzymes. The unique WASHOUT™ Build-Up Remover formula is safe for all pipes and helps dissolve years of build up inside pipes while breaking through common buildup that causes slow-running drains and slow-draining toilets. It’s a much safer alternative to harsh chemicals to sustain a healthy plumbing system. Use regularly for monthly maintenance to prevent slow drains and buildup on drain pipe walls to decrease the frequency of drain problems.